Heat Transfer Prints

1. Simply Preheat your Garment for 12-15 seconds to make sure all the moisture is removed, once your garment get cold then apply the DTF Transfer
2. Place the DTF Print on the garment – white side should be down and image should be facing up
3. Set the Temp at 325°F & hold for 12 seconds
4. Remove the garment from heat press machine and let the print cold before to peel
5. Once the print get cold remove it at one step
6. Cover the image with Teflon paper, butcher paper, or tissue paper and press it again for 15 seconds
***Please note : if the print image doesn’t come off completely, repress with the image in place, let it cool, and repeel the film.

Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low.